jerseycollector Posted October 7, 2010 Report Share Posted October 7, 2010 Anyone ever remove a nameplate off a Avs Starter mesh jersey? I've had no trouble with CCM ultrafils and airknits using a seam ripper - just wondering if there are any tips before I attempt to remove this one? Quote Link to comment Share on other sites More sharing options...
Brilliant! Posted October 7, 2010 Report Share Posted October 7, 2010 It shouldn't be too hard. Nameplates from that era didn't use glue on the back so you should be fine. Quote Link to comment Share on other sites More sharing options...
jerseycollector Posted October 7, 2010 Author Report Share Posted October 7, 2010 It shouldn't be too hard. Nameplates from that era didn't use glue on the back so you should be fine. I don't have the jersey yet so wasn't sure if it was glued on - will be very easy if it's not. Thanks for the info. Quote Link to comment Share on other sites More sharing options...
TMLFAN Posted October 7, 2010 Report Share Posted October 7, 2010 I don't have the jersey yet so wasn't sure if it was glued on - will be very easy if it's not. Thanks for the info. In my experience the nameplates are always the easiest thing to take off when stripping a jersey since most of the time they are not glued down at all and even if they are it's with a very light adhesive. If the nameplate is twill then it might be more of an issue. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.